2.2.3.2Making External SCSI Bus Connections

This section provides step-by-step instructions about making external SCSI bus connections:

Step 1. To connect external SCSI devices to the LSIU40HVD, plug the 68-pin VHDCI connector on one end of a shielded external high density cable (see Figure 2.3) into the host adapter connector J3 or J6 (see Figure 2.1).

This connector is now bracketed to the back panel of your computer. Figure 2.9 shows how this connection is made.

Figure 2.9 External Cable to Host Adapter

2-14

Installing the LSIU40HVD