Manuals / Brands / Computer Equipment / Network Card / LSI / Computer Equipment / Network Card

LSI U40HVD A.2 Operational Environment, A.2.1 The PCI Interface

1 78

Download 78 pages, 600.5 Kb

A.2 Operational Environment

The LSIU40HVD is designed for use in PCI computer systems with an ISA/EISA bracket type. The LSI Logic SDMS software operates the board, but the design of the board does not prevent the use of other software.

A.2.1 The PCI Interface

The PCI interface operates as a 32-bit DMA bus master. The connection is made through the edge connector J1, which provides connections on both the front and back of the board. The signal deﬁnitions and pin numbers conform to the PCI Local Bus Speciﬁcation Revision 2.1 standard. The following tables show the signal assignments.

Note: The + 3.3 V pins are tied together and decoupled with high frequency bypass capacitors to ground. No current from these 3.3 V pins is used on the board. The PCI portion of the LSI53C876 chip is powered from the 3 V/5 V pins.

A-4	Technical Speciﬁcations

Contents

USER’S GUIDE Electromagnetic Compatibility Notices Page Page Preface Page Contents Appendix A Appendix B Glossary Terms and Abbreviations Index Customer Feedback Figures Page Tables Page Using the LSIU40HVD 1.1General Description 1.2Features 1.2.1PCI Interface 1.2.2SCSI Interface 1.2.3Board Characteristics 1.3Interface Descriptions 1.3.1The PCI Interface 1.3.2The SCSI Interface 1.3.3Ultra SCSI Installing the LSIU40HVD 2.1Quick Installation Procedure Page 2.2Detailed Installation Procedure 2.2.1Before You Start 2.2.2Inserting the Host Adapter Figure 2.1 Hardware Connections for the LSIU40HVD 2.2.3Connecting the SCSI Peripherals Table SCSI Bus Widths and Speeds Figure 2.3 SCSI Cables 2.2.3.1Making Internal SCSI Bus Connections Page Figure 2.5 Internal SCSI Ribbon Cable to Internal SCSI Device Connection Figure 2.6 Connecting Additional Internal SCSI Devices Page Figure 2.8 SCSI LED Connectors 2.2.3.2Making External SCSI Bus Connections Figure 2.9 External Cable to Host Adapter Figure 2.10 External Cable to External SSI Device 2.2.4SCSI Bus Termination 2.2.4.1Internal SCSI Connections Figure 2.12 Internal SCSI Device Termination 2.2.4.2External SCSI Connections Figure 2.13 External SCSI Device Termination 2.2.4.3Internal and External SCSI Connections Figure 2.14 Internal and External SCSI Device Termination 2.2.5Setting SCSI IDs 2.3Setting Interrupts 2.4Completing the Installation Page Conﬁguring the Page Page Page Page Page Page Page Page Page Page Page Page Page Appendix A Technical Speciﬁcations A.1 Physical Environment A.1.1 Physical Characteristics A.1.2 Electrical Characteristics A.1.3 Thermal, Atmospheric Characteristics A.1.4 Electromagnetic Compliance A.1.5 Safety Characteristics A.2 Operational Environment A.2.1 The PCI Interface Table A.2 PCI Connector J1 (Front) Table A.3 PCI Connector J1 (Back) A.2.2 The SCSI Interface Table A.4 SCSI Connectors J2/J5 and J3/J6 A.2.3 The LED Interface Page Appendix B Glossary Terms and Abbreviations Conﬁguration CPU DMA Bus Master Device Driver File Firmware Hard Disk Host Host Adapter Motherboard Multitasking Multithreading NVRAM Operating System Port Address Port Number Queue Tags RAM RISC Core SCSI ID SDMS Single-Ended STA Synchronous Data Transfer Wide SCSI Wide Ultra SCSI Wide Ultra2 Word Page Index Page Customer Feedback Reader’s Comments http://www.lsilogic.com/contacts/na_salesofﬁces.html