Figure 2.2 Inserting the Host Adapter

 

Secure the bracket with the

Bracket around

bracket screw.

connector J3 fits where blank

bracket panel was removed.

32-Bit slots

If you plug a 64-bit card into a 32-bit slot, be careful not to damage the main board.

64-Bit slots

2.2Connecting SCSI Peripherals

This section provides information about making internal and external

SCSI connections.

2.2.1Making Internal Wide SCSI Bus Connections

This section provides step-by-step instructions for making internal SCSI bus connections. These steps refer to connectors that are specific to the LSI21003. Internal and external connectors can be 50-pin or 68-pin. Refer to Section 3.3.1, “Internal SCSI Cables,” page 3-10for examples of internal cables.

If you have only external connections, skip to Section 2.2.2, “Making External SCSI Bus Connections,” otherwise follow these steps:

2-4

Detailed Host Adapter Installation