Step 3. Plug in any additional internal SCSI devices, as required.

Figure 2.4 Multiple Internal SCSI Devices Chained Together

Last Device on Chain–

Termination Enabled

External

 

Connector

J5 Connector–

 

Used to connect

 

multiple internal

 

SCSI devices

Internal

Connectors

2.2.2Making External SCSI Bus Connections

This section provides step-by-step instructions for making external SCSI bus connections. Refer to Section 3.3.2, “External SCSI Cables and Connectors,” page 3-11for examples of external cables.

Step 1. Plug the 50-pin connector on one end of a shielded external high density cable into the appropriate connector.

This connector is exposed on the back panel of your computer.

Step 2. Plug the 50-pin connector on the other end of the shielded external SCSI cable into the SCSI connector on your external SCSI device.

2-6

Detailed Host Adapter Installation