9.0Component Test Procedure
9.1POWER SUPPLY
This section details the procedures for testing the functionality of the power supply.
Warning: The power supply produces DC voltages that can cause a severe electric shock if handled improperly. Disconnect power before opening.
∙Input Power:
Plug the computer into the desired power source. The voltage should fall within this range at the power supply input connector.
Option 703, @ connector J1
Pin
1
2
3
Option 704, @ connector J1
Pin
1
2
3
Power
Ground
-(Return)
+20 to +36 VDC
Power
Ground
Neutral
If the measured input voltage is not within the values shown, send the unit back to the factory for power supply replacement/repair.
29