Lucent Technologies 20DS manual BLF Lamps, Power Supply Unit

Models: 20DS

1 12
Download 12 pages 2.72 Kb
Page 4
Image 4

Page 4 - Introduction

The BLF Lamps

The DSS keys incorporate dual-colour BLF lamps. These show the status of the number stored under the DSS key.

Red BLF Lamp Signals:

Slow Red Flash:

A call on a line set under the key has been parked. To unpark the call press the DSS key.

Fast Red Flash:

Shows that the extension set under the key is ringing. To pickup the call press the DSS key.

Solid Red:

The extension, line or group set under the key is busy or not available (e.g. set to no calls with no divert number set). Groups only show busy if all members are busy.

Green BLF Lamp Signals:

Slow Green Flash:

Shows a call parked by your phone. To unpark the call, press the DSS key.

Fast Green Flash:

Shows an external call ringing on a line. To answer the call, press the DSS key.

Solid Green:

Shows a call connected to your phone (or held by it).

Alternating Green/Red Lamp Signals:

– Indicates a call to a Pilot number set under the DSS key.

The Power Supply Unit

The 20DS requires the use of a power supply unit (PSU) plugged into a mains power socket. You must only use the PSU's supplied by Lucent Technologies.

United Kingdom: 38YPW00001SBC.

Rest of Europe: 38YPW00001EBC.

Australia: 38YDW0002AUAA.

WARNING:

You must ensure that the PSU's ventilation slots are not obstructed and that there is clear space all around the PSU. Do not fit the PSU adjacent to other PSU's as excessive heat may be generated.

INDeX 20DS User's Guide

38DHB0002UKCN – Issue 3 March 2000

Page 4
Image 4
Lucent Technologies 20DS manual BLF Lamps, Power Supply Unit