Getting Messages, Test, Transfer | Lucent Technologies 6402D

230738i3.book Page 5 Thursday, July 8, 1999 3:40 PM

Test

The Test feature allows you to test the lights on your telephone and the display, if the telephone has one.

To test the lights and display on the telephone

1. While on-hook, press and hold down Trnsfr .

The lights go on steadily, and, if your telephone has a display, all the display segments fill in.

2. To end test, release Trnsfr .

Lights return to normal operation.

Note: If the display or the lights do not respond during the test, notify your system manager.

Transfer

The Transfer feature allows you to transfer a call from your telephone to another extension or outside number.

To send the present call to another extension

1.Press Trnsfr .

2.Dial the number to which the call is to be transferred.

3.Remain on the line and announce the call. (If the line is busy or if there is no answer, you can return to the held call by pressing and then releasing the switchhook.)

4.	Press Trnsfr again to complete the transfer.
5.	Hang up.

Note: If your telephone is connected to DEFINITY Release 6.3.2 or a later release, your administrator may have chosen Transfer-on-Hang-up. In this case, you can transfer a call by pressing Trnsfr , dialing the number to which the call is to be transferred, and then hanging up. To cancel an attempted transfer, press and release the switchhook or press Feature and then the dial pad key on which the Drop feature is administered.