CHAPTER 2: INSTALLATION | DEFINITY Communications System |
| 7400B Data Module |
Page 2-8 | User’s Guide |
| | |
Setting the Hardware Three hardware options are selected by setting switches on an internal
Option DIP Switches 8-position DIP switch. Setting these switches is described in the following paragraph; however, for more information about using these options, refer to Chapter 4, “Operation and Configuration.”
Note: The factory-default settings of these switches are correct for the vast majority of applications. Check the default settings shown in Table 2-1 to determine whether you need to make any changes.
Telephone | SW1-1 |
| |
Without Phone | ON |
With Phone | OFF |
(factory-default) | |
Data Metering | SW1-5 |
| |
On—enabled | ON |
Off—disabled | OFF |
(factory-default) | |
| |
Busy Out on Local Loop | SW1-8 |
| |
On—enabled | ON |
Off—disabled | OFF |
(factory-default) | |
TABLE 2-1 Option DIP Switch Settings
