Lucent Technologies Communications System manual

1Adjust the ringer volume of your voice terminal’s speaker with the volume control.

2Use the dial pad to place calls. In programming mode, use it to enter codes and data.

3Use Conference, Drop, Transfer, and Hold for efficient call handling.

4Test your voice terminal and program its features by sliding the T/P switch to T (Test) or P (Program),

5Use line buttons to call people who aren’t connected to your system.

6Use the display buttons to operate clock, calendar, timer, and alarm functions.

7Adjust the contrast on the display.

8Use the information on the display as you handle calls and messages and program your voice terminal.

9 Tailor your voice terminal to meet your individual needs by programming available buttons with custom features.

10 Adjust the volume of the speakerphone.

11 The Speakerphone feature allows you to have a phone conversation without using the handset. The Speakerphone light indicates when the feature is activated.

12 Touching the Microphone button while you’re on a call

enables you to have a private side conversation with someone in your office without the caller overhearing it. The Microphone light indicates when the feature is activated.

13 HFAI enables you to answer intercom calls hands free. The HFAI light indicates when the feature is activated.

14 If the Message light is on, call the attendant for your messages.

*The BIS-34D is the largest of the MERLIN Plus system voice terminals. Other models have buttons, but the features they have are located in the same positions as on the BIS-34D shown above.

5