Chapter 10 Troubleshooting
This chapter describes problems you may encounter while using PC120. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact our distributors or service center.
No. | Problems | Solutions |
1 | Boot without power | Ensure that the USB cable is connected. |
| signal |
|
|
|
|
2 | Unable to focus | Probably the document is too close. Pull away the |
|
| distance between document and lens, then click |
|
| [FOCUS]. |
3 | PC120 cannot | Probably the machine cannot operate normally due to |
| operate normally | that the power supply of the USB port at the front end of |
|
| the computer is insufficient. Try to connect to a USB port |
|
| at the rear end or a USB hub with a power adapter. |
4 | Cannot identify | Outdated or incomplete OS versions might not be able to |
| PC120 | identify USB devices like PC120. Please use Windows |
|
| XP SP2 or newer versions that are compatible. |
|
|
|
5 | Output screen is | By default, the voltage/frequency value of Podium ViewTM |
| flickering | is 60Hz. If voltage/frequency of 50Hz is required in your |
|
| country, flickering of screen may occur when the Podium |
|
| ViewTM is used. Please refer to 6.1.3 and 6.2.5 Camera |
|
| Settings of Chap 6 Function Menu to change the |
|
| POWER frequency setting to 50Hz. |
6 | Digital Zoom is | Please click Options to make sure whether |
| disabled | Software Mode is on Annotation Mode. For details, |
|
| please refer to 6.1.4 Options of Chap 6 Function |
|
| Menu. |
