Operation
WARNING: Read the safety section and operating instructions in this manual before use.
WARNING: Before using the HybridLX™, ensure that the wheels are securely attached to the frame, that the seat is fully in its locked position, and that the push buttons protrude fully through the height adjustment holes for the armrests and legs.
Before proceeding, ensure that all instructions in the previous section, ASSEMBLY, have been fol- lowed, and that you have read the SAFETY section of this manual.
Desempacar
A menos que el HybridLX™ va ser usado inmediatamente, guarde la caja y materiales de almacena- je para almacenaje hasta que uso es requerido.
1.Cheque por daño obvio al cartón y los contenidos. Si hay daño evidente, notifique a su compa- ñía de transportes y a su distribuidor autorizado de
2.Remueve todo las materiales de almacenaje suelto de la caja.
3.Con cuidado remueve todos los componentes del cartón.
Rollator Mode
Rollator Setup
The photo at right shows the HybridLX™ in Rollator mode. To keep the backrest away from your hands, position the backrest away from the handles as shown at right.
Walking With Your Rollator
1.Move your rollator slowly forward and always be sure that the rear wheels are a few inches ahead of your body.
2.Select a pace that is comfortable for you.
handle
handbrake
seat
Cada caja debe contener los componentes siguientes:
1 Marco del HybridLX™
2 Ruedas Traseras (con dos perillas de cierre traseras)
2 Ruedas Delanteras
1 Bolsa de Almacenaje
1 Par de Reposapiés de presión
ASAMBLEA
Ruedas Delanteras
Stopping With Your Rollator
The rollator has loop locking handbrakes. To slow down, squeeze the handbrakes upward toward the handles. To hold the rollator in a stationary position,
push the handbrakes down, away from the handles, until the handbrakes lock into place; the rear wheels will be locked in place. To release, pull the handbrakes upward toward the handles until the rear wheels move freely.
To Sit in Rollator
1.Push the handbrakes down, away from the handles, until the handbrakes lock into the parked position.
2.Test the wheels before sitting down to ensure the rollator will not roll.
3.Before sitting, touch the back of your legs to the edge of the seat to ensure proper positioning of the rollator.
4.Hold onto handles or top armrests of rollator if necessary to help you lower your body onto the seat.
WARNING: Distribute your body weight evenly on the HybridLX™.
WARNING: DO NOT lean on one side of the HybridLX™.
WARNING: Ensure that handbrakes stop rollator and lock in place appropriately before occupying or operating rollator. If your handbrakes are not operating correctly, please see your
| marco | horquilla (indicando | botón de desconexión |
|
| hacia atrás) | fácil de rueda delantera |
Instalación de Rueda Delantera | Remover la Rueda Delantera | ||
Instalación de Rueda Delantera
1.Remueva el plástico envoltorio de la rueda.
2.Inserta la rueda en el marco del frente con la horquilla indicando a la parte trasera del rodador, como se ve en la foto a la izquierda. Vas a oír un “clic” cuando la rueda está puesto seguramen- te en posición.
Remover la Rueda Delantera
1.Apreté el botón rojo, como se ve en la foto a la derecha.
2.Jale la rueda del marco.
8 |
| 5 |
