Accessories
You should find the following in the accessory kit:
1.One mains cord
2.This manual
3.Customer registration form
4.Remote control
5.RS232 Cable for firmware upgrade from a PC
6.Programming cable
Operating voltage
The Millennium is available in a version for 115V mains voltage and in a version for 230V mains voltage.
Check the label on the Millennium rear panel and verify you have the version with the proper voltage for your geographical area.
The 115V version requires a mains voltage of
The 230V version requires a mains voltage of
The mains voltage setting for your Millennium can be changed ONLY BY A QUALIFIED ENGINEER.
WARNING: Connect the power input only to the AC source printed on the label. The warranty will not cover any damage caused by connecting to the wrong type of AC mains.
The Millennium has three power modes:
1.OFF – No circuitry is powered.
2.STANDBY – The mains transformer and amplifier section is powered off, only the remote control input and the microprocessor is powered, so the unit can be powered up using the remote control “STANDBY” button
3.ON – All circuits active
Product Registration
Please record the serial number of your amplifier here for future reference. The serial number is printed on the label on the Millennium rear panel. You will need this serial number, should you ever require service for your Millennium power amplifier.
Millennium MkIV serial number: _____________________
- 6 -
