Introduction
Lyngdorf Millennium is the world's first
The core technology is based on patented EQUlBlT™ processing and output modules. The Lyngdorf Millennium is a modular design, a platform for
Features:
Hardware:
•Clocking of the PWM modulator is running in master mode at increased sampling frequency which insures optimal performance in the audio band compared to other implementations
•Ultra low phase noise / low jitter clock system extends the dynamic range and gives extremely low jitter
•All digital signals on the PCB are noise optimized regarding transmission line load to reduce interference to clock systems.
•Built in Audio DSP’s for Equalizers, crossovers delays etc.
•New Digital transceiver supporting 192kHz single wire interface
•New Asyncronous Sample Rate Converter with internal conversion rate always clear of 1:1 conversion problems.
•Optimized low jitter clock system
•PC interface for programming, control and upgrades
•
Performance:
•THD+N level
•THD+N level
•THD+N < 0.01% @1kHz 10W in 8 Ohms (<0.02% from
•THD+N < 0.015% @100W from
•Dynamic range 107dB digital plus 26 dB PSU variation - totals 133 dB
•DAC line out Dynamic range 116dB
•DAC line out SN+THD ratio
•DAC linearity
•ASRC THD+N
Software:
•PC Interface for control of all built in functions, remote accessible via RS232 interface. Firmware upgradable from PC, DSP control software.
•8 Presets with full storage of all filter parameters for A/B testing, different seating, music modes etc.
•20 band Parametric Equalizer and delays up to 7 meters per channel.
- 7 -