Front panel operations
The operations of the remote control receiver can be bypassed on the front panel for the Millennium. Bypassing the remote control is done with a long press on the Analog left selection key “A”. When the remote is turned off the Lyngdorf Logo blinks twice after a 2 sec. press. If the remote functionality is turned on – the Lyngdorf Logo blinks once.
Software
Software and documentation, for both PC and Millennium, can be downloaded from our homepage at http://www.lyngdorf.com.
The software for PC is:
•Serial Load – used for upgrading the software in Millennium
•AmpCom – used for controlling and setting up Millennium from a PC.
•LYNGDORF DSP – used for making digital filters, crossover and voicing in Millennium.
These 3 programs come in a zip file called “PC Pack x.x.zip” where x.x is the version number. In this file are a “setup.exe” and a text file with a release description. Software or firmware for Millennium comes in a separate file called “Millennium release xx.zip” where xx is the version number. In this file are a “releasexx.s19” and a text file with a release description.
- 15 -