Tampa Manual, Table of Contents | M-Audio 81602 instruction

TAMPA Manual
version: Tampa-081602
Table of Contents
Introduction	.2
Temporal Harmonic Alignment	.2
Dual Optical Servo Compressor	.2
Your TAMPA’s Features	.2
Front and Rear Panel Descriptions	.3
Front Panel Features	.3
Rear Panel Features	.5
Setup and Connection	.5
AC power	.5
Connecting Your Tampa’s Outputs	.6
Power-Up Procedure	.8
Connecting To Your Tampa’s Inputs	.8
TAMPA Controls	.9
Setting Levels	.9
The Input Impedance Selector	11
Using the Phase Invert Switch	11
Using the Low-Cut Filter	11
Setting the Compressor	12
TAMPA Specifications	16
Preamp Specs	16
Analog Compressor Specs	16
Technical Support & Contact Information	17
Your TAMPA’s Warranty	18

Image 1

Contents

Tampa Manual Table of Contents Introduction Your TAMPA’s FeaturesFront and Rear Panel Descriptions Rear Panel Features Setup and ConnectionAC power To output to digital equipment Connecting Your Tampa’s Outputs Tampa Controls Using the Phase Invert Switch About Soft Clipping and the 20dB Pad SwitchUsing the Low-Cut Filter Input Impedance Selector Setting the Compressor Typical Vocals Transparent Typical SettingsAcoustic Guitar Transparent Acoustic Guitar Maximum Presence Technical Support & Contact Information Tampa SpecificationsPreamp Specs Analog Compressor Specs Your TAMPA’s Warranty

M-Audio 81602 specifications Tampa Manual, Table of Contents