Manuals / Macally / Computer Equipment / Computer Drive

Macally G-S350SUAB2 manual the connector completely

Models: G-S350SUAB2

1 18

Download 18 pages 32.07 Kb

Page 8

the connector completely.

3. Pull the Enclosure Sleeve out from the Base Tray and place it aside.

4.Align the black Power/SATA connector on the hard drive to the black female SATA connector on the Base plate bridge, and push the drive into

the connector completely.

5. Secure the HDD to the Base Tray with 2 hard drive screws.

8

Image 8

Macally G-S350SUAB2 manual the connector completely, Secure the HDD to the Base Tray with 2 hard drive screws

Contents

3.5” Serial ATA Hard Drive Enclosure G-S350SUAB2 Users Manual IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0/eSATACONTENTS 3.5 Hard Drive Enclosure - G-S350SUAB2 Introducing IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0/eSATAAbout This Guide System RequirementsSafety Precautions Package ContentsAlways remove the disc before moving the unit Hardware Basic PrecautionHardware Installation Note The diagrams below uses the G-S350UAB2 Enclosure as an example1. Unscrew to loosen the Enclosure Back Panel. Remove the Back Panel 2. Use your fingers to push the Base Tray outthe connector completely 5. Secure the HDD to the Base Tray with 2 hard drive screws6. Push the Base Tray into the Enclosure Sleeve 7. Secure the Base Tray and Enclosure Sleeve with two 6mm screwsSoftware Installation for Mac SATA Connection for MacOS X 10.2 and aboveFireWire and USB Connection for MacOS 9.2 and MacOS SATA Connection for Windows 2000/XP/Vista/Windows Software Installation for PCFirewire and USB Connection For Windows 2000/XP/Vista/Windows 2. Click on “Disk Management” 4. Write a signature to the new drive, click “Next” 5. Click “Finish” to close the wizardStep Step6. Select the new “Unallocated” disk, and then right click to choose “Create partition” Frequently Asked Questions Page Raw Interface speed Benchmark comparison 64K read Benchmark