Macally PHR-100SU user manual Hard Drive Partition and Format procedures in PC, For Windows 98SE

Note: If you don’t see the new drive letter added in My Computer after driver is loaded properly, the reason could be the hard disk has no par- tition and format yet, please partition and format the drive in the enclo- sure before using it.

Hard Drive Partition and Format procedures in PC:

It is recommended to do the partition and format under “USB connection”.

For Windows 98SE

If a new hard disk icon dose not appear in “My Computer”, check device manager under system in the control panel. Then double click on “Disk Drives” to see if a new entry appears.

If you can see a new entry as shown (Example, WDC WD80 OBB-32BSA0) above, you are ready to partition and format the drive.

Please open MS-DOS prompt, run DOS command FDISK to partition the new hard drive. Then, disconnect and power off PHR-100SU. Turn on PHR- 100SU, reconnect it to computer’s USB port. You will see a new drive icon in “My computer”. Format it before using the new drive.

16