Plug-in Configuration and Routing

Configuring the Plug-In

After installing your UFX card, unlocking the plug-in, and booting up the D8B, all you need to do is put the kettle on, have a cup of tea, and assign the plug-in to the card.

The following instructions are general for most plug-ins. Please note that the graphics may not exactly match the plug-in you have, but the procedures are the same for all plug-ins.

Assigning the Plug-in to a UFX Card

1. Click the Plugins menu and select Plugins, or use the keyboard shortcut Ctrl+P.

2.In the Plugin Configuration menu, locate the card slot

that contains the UFX card to which you want to assign the plug-in.

3.In the Mode column, click a button and set it to mono or stereo, depending on your preference.

4.In the Plugin Select column, select the plug-in from the drop-down menu. It should look something like this:

Note: A plug-in can also be loaded from the Setup section on the console.

User’s Guide