Features, Technical data | Macrom M1A.1500D

Features

• Class D mono channel power ampliﬁer

• 1500 watts into 2 ohms load

• 900 watts into 4 ohms load

• High efﬁciency Class D design

• Variable Low pass x-ower at 24dB/oct

• Variable Sub sonic ﬁlter from 20 to 55Hz at 24dB/oct

• Adjustable from 0 to +12dB at 45Hz Bass Boost

• Phase control from 0 to 180°

• EBC external bass control

• Pre-ampliﬁed output with High pass crossover option

• PWM Mos-Fet power supply

• 20sq.mm power terminals

	Technical data
RMS Power at 4 ohm Stereo load at 14,4 volts	900 x 1 watts
RMS Power at 2 ohm Stereo load at 14,4 volts	1500 x 1 watts
THD (total Harmonic Distortion)	< 0,5%
Frequency response (+0/-1 dB)	10 - 300Hz
Signal to noise ratio	> 95dB
Low Input sensitivity	200-8,000mV
Input impedance	22k ohm
Crossover type	Variable 24dB/octave
Crossover frequency (Low-pass)	30 to 300Hz
Sub sonic ﬁ lter	20 to 50HZ at 24dB/octave
Bass Boost	0 to 12dB @ 40Hz
Phase	0° to 180°
Line Out	1-1 (with High pass)
EBC “Expernal Bass Control”	YES
Dimension (w * h * d) mm	250 x 55 x 430