continuity for 0.1 ohm or less between the external ground pin and frame ground.

b.The power cord should be the appropriate type as specified in the parts listings.

c.Insulation must not be frayed or worn.

4.Remove the cover.

5.Check for any obvious non-IBM alterations. Use good judgment as to the safety of any non-IBM alterations.

6.Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.

7.Check for worn, frayed, or pinched cables.

8.Check that the power-supply cover fasteners (screws or rivets) have not been removed or tampered with.

Handling Electrostatic Discharge-Sensitive Devices

Any computer part containing transistors or integrated circuits ( ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.

Notes:

1.Use product-specific ESD procedures when they exceed the requirements noted here.

2.Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective.

When handling ESD-sensitive parts:

vKeep the parts in protective packages until they are inserted into the product.

vAvoid contact with other people.

vWear a grounded wrist strap against your skin to eliminate static on your body.

vPrevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap.

vUse the black side of a grounded work mat to provide a static-free work surface. The mat is especially useful when handling ESD-sensitive devices.

vSelect a grounding system, such as those listed below, to provide protection that meets the specific service requirement.

Note: The use of a grounding system is desirable but not required to protect against ESD damage.

ThinkPad i Series 1200/1300 15

Page 24 Page 26
Page 25
Image 25
Madge Networks 1200, 1300 manual Handling Electrostatic Discharge-Sensitive Devices
Page 24 Page 26

1300, 1200 specifications

Madge Networks was a pioneering entity in the networking industry, notably recognized for its advanced solutions in the area of Token Ring technology during the late 20th century. The Madge Networks 1200 and 1300 series, launched in the mid-1990s, represented significant advancements in network performance and reliability.

The Madge Networks 1200 series was designed to cater to businesses looking for a robust networking infrastructure. This series supported Token Ring networks, which offered advantages such as reduced collision domains, enhanced fault tolerance, and improved data integrity. With a throughput of up to 16 Mbps, the 1200 series provided companies with the ability to efficiently handle data-intensive applications. Its architecture allowed for seamless integration with existing networks, ensuring a smooth transition for organizations upgrading their infrastructure.

On the other hand, the Madge Networks 1300 series took performance a step further. It offered higher throughput capabilities, advancing up to 100 Mbps. This was a remarkable leap for organizations striving for increased bandwidth and lower latency in their communications. The 1300 series featured more advanced management tools, providing network administrators with enhanced visibility and control over network performance. These tools facilitated real-time monitoring and troubleshooting, which were vital for maintaining optimal network health.

Both series utilized proprietary technologies such as the Madge Token Ring ASIC, which improved reliability and performance under high-load conditions. They also featured support for multiple network topologies and configurations, making them highly versatile for different business environments. The hardware was designed for easy scalability, allowing enterprises to expand their networking capabilities without significant overhauls.

Security features were also integrated into both the 1200 and 1300 series. With built-in functionalities for network access control and error detection, these devices ensured a secure networking environment. Each device was engineered to support redundancy protocols, minimizing chances of service disruptions, crucial for mission-critical applications.

In summary, the Madge Networks 1200 and 1300 series exemplified the networking innovations of their era, combining performance with reliability and scalability. They catered to various business needs, providing a flexible and secure networking solution that paved the way for future advancements in enterprise networking. Their legacy continues to influence modern networking technologies.
Top Page Image Contents