Turn an additional 90 degrees after the screw head touches the surface of the plastic part:
vLogic card to plastic
Turn an additional 180 degrees after the screw head touches the surface of the plastic part:
vTorque driver
If you have a torque driver, refer to the ″Torque″ column with each step.
vMake sure you use the correct screw, and tighten all screws firmly to the torque shown in the table if you have a torque screwdriver. Never use a screw that you removed. Use a new one. Make sure the screws are tightened firmly.
System board/LCD/Inverter replacement notice
Restoring the LCD panel ID
The EEPROM on the inverter stores its supported LCD type ID code. If you replace a LCD with one of a different brand or use a new inverter, the ID information in the inverter EEPROM should be updated.
Follow the steps blew to set the LCD panel ID:
1.Install the ThinkPad CE Utility Diskette and restart the computer.
2.Select 1. LCD Panel ID Utility from the main menu.
