22
Smart DeskStream Technical Presentation 22
nStacking Module cannot be hot-
swapped
nDeskStream unit must be powered off
before installing stacking module
nCable may be connected to another
DeskStream while it is powered on
nStacking becomes active on reboot of all
DeskStream units in stack
Connectivity
Stacking Module - 3
It is important to remember that any installation or removal of
modules must be done with power off - this device has no hot
swappable units.
Cabling is, of course movable at any time and this includes the
stacking bus cables. Removing a stacking bus cable will be detected
by the Master unit and this will cause a reboot; adding a cable is not
detected by the Master so a manual stack reboot will be required.