37
Smart DeskStream Technical Presentation 37

Telnet and serial interface menu is easy:

DeskStream Terminal Configuration
1. General
2. Versions
3. IP
4. Port
5. Port Group
6. Spanning Tree
7. Bridge
8. Download
9. Debug
10. Quit
Enter selection number:
Smart DeskStream Manager

Command Line Interface

The CLI is divided into a number of sections, each of which is divided

further. Each will have some Show and Set commands, possibly

function Enable and Disable.

1. General system values
system health
I-field values (name, contact, location)
set passwords
2. Versions version numbers and build time
3. IP IP values, set address, subnet, gateway
enable BOOTP, DHCP, RARP
4. Port Show/configure various port parameters on a per port basis
5. Port Group Show/configure port group parameters
6. Bridge Show/set bridge no., hop limit, SR or SRT
7. Spanning Tree Show/set spanning tree protocol parameters
8. Download Set IP/IPX address of binary file host
Start IP or IPX download
9. Debug Set address for uploading file, dump or configuration data
Show last reset, last dump, last saved data
10. Quit Guess!