Madrigal Imaging N380S owner manual 10STANDBY BUTTON

If you adjust the volume with either the volume knob or the remote control while mute is engaged, the preamplifier will adjust its volume from the muted volume and disengage the mute function. (This to prevent an un- pleasant surprise when, having increased the volume while muted, some- one un-mutes the system.)

The factory default setting of the Mute circuit is -20 dB. (See “Setup and Installation” for information on changing the factory default setting.)

10STANDBY BUTTON

Toggles the Nº380S between normal operation and standby, wherein the display is turned off, the outputs are disconnected, and all controls are in- operable. All critical circuitry remains powered-up during standby to en- sure immediate, optimal performance when you are ready to listen to mu- sic.

The LED above the standby button will blink slowly when the Nº380S is in standby, indicating that power is still being provided to the unit. (If the Nº380S is Linked to other Mark Levinson components which are also in standby, they will blink in unison.)

11