Oven Light
Oven light bulb is located on the back oven
wall. Before replacing the light bulb, disconnect power to oven. Be sure bulb is
cool. Do not touch a hot bulb with a damp cloth as the bulb may break. Use a dry pot holder to prevent possible harm to hands. If bulb should break, use pot holder to protect hands and very carefully remove bulb. If bulb breaks at base, have a service technician remove bulb.
Replace with a 40 watt appliance bulb. Restore power to oven. Reset clock.
Electrical Connection
Appliances which require electrical power are equipped with a
Always disconnect power to appliance before servicing.
If an ungrounded,
electrical outlet is encountered, it is the personal responsibility of the appliance owner to have the receptacle replaced with a properly grounded
provided for protection against shock hazards.
Do not cut or remove the third grounding prong from the power cord plug.
How to Remove Wall Oven For Servicing Or Cleaning
Follow these procedures to remove appliance for cleaning or servicing:
1.Shut off gas supply to appliance.
2.Disconnect electrical supply to appliance.
3.Disconnect gas supply tubing to appliance.
4.Remove the screws that secure the wall oven to the cabinet. Remove from the cabinet.
5.Reverse procedure to reinstall. If gas line has been disconnected, check for gas leaks after reconnection. See Installation Instructions for gas leak test method.
NOTE: A qualified servicer should disconnect and reconnect the gas supply.
WARNING: Possible risk may result from abnormal usage, including excessive loading of the oven door and of the risk of tip over, should the appliance not be reinstalled according to the installation instructions.
Maintenance
PAGE 17
