Spanner Faucet Wrench
Spanner faucet wrench provided for either removing or tightening connection
Plastic Faucet Lever
Attach the black plastic lever (pull handle) provided on the top of the faucet tightening it by hand clockwise until the end, holding in the silver snug underneath so it does not move.
If there is still a small drip from the faucet, you may have tightened the plastic lever too much and may need to unscrew silver snug counter- clockwise (as shown) one turn. That should correct the problem if exists.
DISPENSING OF BEER
•Keep beer keg refrigerated at all times.
•Never allow beer lines to dry out.
•Use clean beer glassware before pouring.
•Hold glass at a 45°angle when 2/3 full, start to straighten glass as the glass fills.
•Always make sure the faucet handle is pushed all the way back.
Note: Keg sizes that can be used in your beer dispenser |
| |||
1/2 barrel | 59 Liters | 15.5 gals | 1984 oz. | |
1/4 barrel | 30 Liters | 7.8 gals. | 992 oz. | |
1/6 barrel | 20 Liters | 5.2 gals. | 661 oz. | 55/ |
1/8 barrel | 15 Liters | 4.0 gals. | 496 oz. | 41/ |
Note: Our Beer dispenser accepts almost all, Brand Name ½ kegs. However Coors’ kegs do not fit in our unit.
9