Installation

Location

•Do not install refrigerator near oven, radiator or other heat source. If not possible, shield refrigerator with cabinet material.

•Do not install where temperature falls below 55° F (13° C) or rises above 110° F (43° C). Malfunction may occur at this temperature.

•Refrigerator is designed for indoor household application only.

Measuring the Opening

When installing your refrigerator, allow 1⁄2” space at top and 1⁄2” space behind machine compartment cover (located in the rear) for proper air circulation. If the refrigerator is placed with the door hinge side against a wall, you may want to allow additional space so the door can be opened wider.

Subflooring or floor coverings (i.e. carpet, tile, wood floors, rugs) may make your opening smaller than anticipated.

Some clearance may be gained by using the leveling procedure under Leveling.

Important: If refrigerator is to be installed into a recess where the top of the refrigerator is completely covered, use dimensions from floor to top of hinge cap to verify proper clearance.

Transporting Your Refrigerator

•NEVER transport refrigerator on its side. If an upright position is not possible, lay refrigerator on its back. Allow refrigerator to sit upright for approximately 30 minutes before plugging it in to assure oil returns to the compressor. Plugging refrigerator in immediately may cause damage to internal parts.

•Use an appliance dolly when moving refrigerator. ALWAYS truck refrigerator from its side or back–NEVER from its front.

•Protect outside finish of refrigerator during transport by wrapping cabinet in blankets or inserting padding between the refrigerator and dolly.

•Secure refrigerator to dolly firmly with straps or bungee cords. Thread straps through handles when possible. Do not over-tighten. Over-tightening restraints may dent or damage outside finish.

Door and Hinge Removal

Some installations require door removal to get refrigerator to final location.

WARNING

To avoid severe personal injury or death, observe the following:

•Disconnect power to refrigerator before removing doors. Connect power only after replacing doors.

•Green ground wire must be attached to top hinge while performing door removal and replacement.

•Tape decorative panels (select models) securely into place before removing door handles.

CAUTION

To avoid property damage, observe the following:

•Protect vinyl or other flooring with cardboard, rugs or other protective material prior to moving refrigerator.

•Do not adjust refrigerator to be any shorter than 681⁄2” tall (minus hinge and cap). Doing so may damage underside components.

1.Unplug power cord from power source.

2.Remove toe grille (see page 4).

• Open both doors 180°, or as wide as possible.

Note: For refrigerators in operation, shut off water before removing water line from the door.

To Disconnect the Water Line:

•Push in white collar (A) and hold.

•Pull the door-side tube from the connector (B).

To Reconnect the Water Line:

•Firmly push tube 5⁄8” into the connector. Use lines on the tube as a guide for full insertion.

•If tube end is damaged, cut off 5⁄8” before reconnecting.

•If leaking occurs, reconnect the line.

A

B

3

Page 3 Page 5
Page 4
Image 4
Magic Chef MSD2641KEB, 12842123 Installation, Location, Measuring the Opening, Transporting Your Refrigerator
Page 3 Page 5

MSD2641KEB, 12842123 specifications

The Magic Chef 12842123, MSD2641KEB is a standout model in the realm of kitchen appliances, delivering a perfect blend of efficiency, style, and practicality. This refrigerator is designed to cater to the needs of modern households, offering a range of features that enhance convenience while ensuring optimal food preservation.

One of the main features of the MSD2641KEB is its spacious interior, providing ample storage capacity with adjustable shelves and ample door bins. This refrigerator is designed to accommodate various food items, making it ideal for both everyday use and special occasions. The Flexi-Slide bin is particularly noteworthy, allowing users to create additional space for larger items, which can be a game changer during grocery shopping.

In terms of technology, the MSD2641KEB is equipped with a frost-free cooling system that eliminates the hassles of manual defrosting. This feature not only saves time but also helps maintain a consistent temperature throughout the unit, ensuring that food stays fresh for longer periods. The unit also employs energy-efficient LED lighting, which not only illuminates the interior but also consumes less energy compared to traditional bulb options.

Another significant characteristic is the external water and ice dispenser, which provides quick access to chilled water and ice without the need to open the refrigerator door. This feature helps in minimizing energy loss while offering convenience, especially during hot summer months. Additionally, the unit includes a water filter that delivers clean, fresh-tasting water for drinking and cooking.

The MSD2641KEB boasts a sleek, modern design that fits seamlessly into any kitchen décor. Its stainless steel finish not only adds an element of sophistication but is also easy to clean and maintain. The refrigerator is designed with user-friendly controls, making it simple to adjust temperatures and settings according to personal preferences.

Safety is paramount, and this model incorporates a child lock feature, giving parents peace of mind. Furthermore, the innovative cooling technology used in the MSD2641KEB ensures that energy consumption remains low, making it an environmentally friendly choice.

In summary, the Magic Chef 12842123, MSD2641KEB is a versatile, efficient refrigerator that combines modern design with innovative technology. Its user-friendly features, spacious layout, and energy-saving capabilities make it an excellent addition to any kitchen, catering to the diverse needs of families and individuals alike.
Top Page Image Contents