Magic Chef MSD2641KEB, 12842123 Triple Cool Climate Control, Initial Temperature Setting

Temperature Controls

•Except when starting the refrigerator, do not change either control more than one number at a time.

•Allow 24 hours for temperatures to stabilize.

Temperature Control Guide

Refrigerator too warm Set the Refrigerator control to next higher number by

pressing the pad.

Refrigerator too cold Set the Refrigerator control to next lower number by

pressing the pad.

Freezer too warm	Set the Freezer control to next
	higher number by pressing the
	pad.
Freezer too cold	Set the Freezer control to next
	lower number by pressing the
	pad.
Turn refrigerator OFF	Press the Freezer or
	Refrigerator	pad until a
	dash “–” appears in the
	display.

Triple Cool Climate Control

(select models)

The control is located at the top front of the fresh food compartment.

Control

Initial Temperature Setting

Temperatures are preset at the factory at 38° F (3° C) in the fresh food compartment and 0° F (-17° C) in the freezer compartment.

Adjusting the Control

24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If so, adjust the control as indicated in the Temperature Control Guide.

•The first touch of the or pads shows the current temperature setting.

•The display will show the new setting for approximately three seconds, and then return to the actual temperature currently within that compartment.

•Do not change either control more than one degree at a time. Allow temperature to stabilize for 24 hours

9before making a new temperature adjustment.

Temperature Control Guide

Refrigerator too cold Set the Refrigerator control to next higher number by

pressing the pad.

Refrigerator too warm Set the Refrigerator control to next lower number by

pressing the pad.

Freezer too cold	Set the Freezer control to next
	higher number by pressing the
		pad.
Freezer too warm	Set the Freezer control to next
	lower number by pressing the
		pad.
Turn refrigerator OFF	Press the Freezer		pad
	until “OFF” appears in the
	display. Press either the
	Freezer or Refrigerator
	pad to turn back on.

Speed Ice

When activated, Speed Ice reduces the freezer temperature to the optimum setting for 24 hours in order to produce more ice. Important: When the Speed Ice

feature is in operation, the and pads for the Freezer control will not operate.

Reset Filter (select models)

When a water filter has been installed in the refrigerator, the yellow Order light will illuminate when 90 % of the volume of water for which the filter is rated has passed through the filter OR 11 months have elapsed since the filter has been installed.

The red Replace light will illuminate when the rated volume of water has passed through the filter OR 12 months have elapsed since the filter was installed. A new filter should be installed immediately when the Replace light is illuminated.

After replacing the filter, press and hold the Reset Filter pad for three seconds. The Order and Replace lights will go off.

Vacation Mode

The Vacation Mode feature causes the freezer to defrost less frequently, conserving energy. The Vacation Mode indicator light will illuminate when the feature is activated. To deactivate, press the Vacation Mode pad again OR open either door. The indicator light will go off.