LEAK TEST
•Do not use an open flame to check for leaks.
•Do not remove valve orifices.
•Do not smoke during testing.
•Do not test indoors. Always test outdoors in a
•Test for leaks each time the propane canister is replaced.
•Use a solution of mild soap (liquid dish soap works well) and water for testing
TEST PROCEDURE
1.Visually inspect all hoses before each use. If there is excessive abrasion, wear, or cutting, replace the hoses before further use. Replace defective hoses only with those specified
by the manufacturer.
2. Be sure that the valve |
| Burner | |||
is in the off position. |
| ||||
|
| ||||
3. Be sure that the natural |
|
| |||
gas delivery hose is correctly |
|
| |||
and securely connected. |
|
| Venturi Tube | ||
4. Using a small paint brush, spread |
| ||||
|
| ||||
a thin coating of the soap/water |
|
| |||
solution onto the following |
| Inspection Panel | |||
connections: |
| ||||
| Oriface | ||||
|
|
|
|
| |
Residential Gas Supply |
| ||||
| Gas Delivery Hose | ||||
Natural Gas Supply Hose |
|
| |||
|
| ||||
|
|
|
|
| Valve |
Gas Supply Hose - Valve Inlet |
| ||||
|
| ||||
Valve Outlet - Gas Delivery Hose |
|
| |||
5.If the soap/water solution bubbles
there is a leak. Immediately |
| Gas Supply Hose | |
| |||
disconnect the gas supply and check |
|
| |
connections. Reconnect the gas |
|
| Natural Gas Inlet |
|
| ||
supply and repeat the test. |
| ||
|
| ||
6.If the soap/water solution continues to bubble, remove the gas supply
hose and replace the defective parts | Access Panel |
before using grill. |
Natural Gas 
Supply Hose
9
