Camera Operation (Option)
Automatic Camera Selection:
Rear View Camera:
The rear view camera will automatically activate when the ignition key is turned "On" and the vehicle is put into reverse. The video image from the camera will appear on the screen and the audio from the rear camera only can be heard through the vehicle’s speakers.
Note: This system only provides for one way audio, from the camera to the
Side View Cameras (Left and Right)(if equipped):
The side view cameras will automatically activate when the ignition key is turned "On" and the vehicle’s turn signal are used. The video image from the camera will appear on the screen.
Note: Side view cameras do not have audio.
Front View Camera
The front view camera can not be automatically activated. The front view camera can only be manually selected, see “Manually Selecting the Camera View” below for more information.
Note: Front view camera does not have audio.
Note: Automatically activated camera views have priority over manually selected camera views.
For instance: When a vehicle is put into reverse gear the rear camera view will automatically be displayed on the screen. A manually selected camera view can not override the rear camera view.
Manually Selecting the Camera View:
1.Press the HOME button to select the source screen. Then press the CAMERA button to select the camera source screen.
2.Select a camera view (FRONT, LEFT, RIGHT or REAR) by pressing the button associated with the camera view you want to display on the screen.
Note: The front view camera may not be selec- table depending if the system has a front view camera. If the system has a front view camera and is not available for selection go to “System Setup” (page 7) to activate the front camera.
Rearview Camera (for motorized camera only):
If the rear view camera is motorized, there are two adjustment features available: tilt control and camera view presets. (Motorized cameras are not installed on all units).
Tilt Control:
Push the button to tilt the camera view up. Push the button to tilt the camera view down.
Camera View Presets:
To program a tilt viewing angle, press and hold either PRESET A or PRESET B button. To recall a programmed preset, press and release the but- ton and the camera will automatically adjust.
Camera Views
Tilt | Camera Views |
Control | Presets |
37
