Magnadyne M1-LCD installation manual Installation, Removing the Unit

Installation

Step 1: The radio chassis is designed to be “Sleeve Mounted” through an opening in the dashboard panel. The required opening size is 182mm (7-3/16") x 84mm (3-5/16"). Cut or engage an opening in the dashboard to accommodate the mounting sleeve.

Step 2: Insert the mounting sleeve into the opening in the dashboard. Bend the metal tabs on the sleeve to secure the mounting sleeve to the dashboard.

Step 3: Bring all wiring for the connection of the unit (including the antenna) through the center of the mounting sleeve.

Sheet Metal

Screw

Nut

Washer

Metal Strap

Dashboard

Mounting Sleeve

Removing the Unit:

To remove the radio after installation, insert the removal keys straight back until they click. Then pull the radio out.

Note: If the removal keys are inserted at an angle they will not release the radio.

Insert Removal

Keys Here

Insert Removal

Keys Here

41