| 3. Firmly pull the stand from the bottom of the TV. | ||
ENGLISH | Place both the stand and bolts in a secure | ||
location for future reinstallation. | |||
| |||
FRANÇAISE |
|
| |
|
| ||
|
| ||
ESPAÑOL | Connect the antenna cable, AC power cord and all | ||
| Step 3 Connect cables | ||
| other devices to the back of the TV as described in | ||
| the following sections and in Section 7 Connect devices. | ||
Step 4 Secure the VESA-compatible wall bracket to the TV
BB WARNING
Only use the specified bolts (M4) to secure the
DD Note
Depending on your
100x100 mm
4.3Install the remote control batteries
1.Open the battery cover on the back of the remote control.
2.Insert the 2 batteries supplied. Make sure the + and - ends of the batteries line up correctly. (inside of case is marked).
3.Close the cover.
4.4Connect the antenna or cable
This section describes how to connect your TV to an antenna, cable, Direct Broadcast Satellite, and to a cable receiver box.
CABLE
Connect to an antenna
Any DTV programs that are broadcast in your area can be received for free through an antenna connection.
Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area.
Broadcasters are transitioning from analog to digital TV. This means that a given broadcaster can have channels available either in analog or in digital, or both analog and digital at the same time.
The TV has stereo sound if the broadcasting channel makes it available.
