Magnavox 27MS3404R owner manual Using the S-VIDEO Input Jacks, Press the Play
button

USING THE S-VIDEO INPUT JACKS

The S(uper)-Video connection on the rear of the TV can provide you with better picture detail and clarity for the playback of accessory

sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and S- VHS VCR (video cassette recorder) tapes than the normal antenna picture connections.

NOTE: The accessory device must have an S- VIDEO OUT(put) jack in order for you to com- plete the connection on this page.

1 Connect one end of the S-VIDEO CABLE to the S-VIDEO jack on the back of the TV. Then connect one end the AUDIO (red and white) CABLES to the AV2 in AUDIO L and R (left and right) jacks on the rear of the TV.

2 Connect other end of the S- VIDEO CABLE to the S-VIDEO OUT jack on the back of the VCR. Then connect the other ends of the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR.

3 Turn the VCR and the TV ON.

4 Press the CH + or CH- buttons to set the TV to its SVHS channel. (Go

to your lowest channel, for example channel 1, then change channels down to find the correct source channel.)

5 Now you’re ready to place a prere- corded video tape in the VCR and

press the PLAY
button.

HELPFUL HINT

The S-VIDEO and VIDEO AV2 in(puts) are in parallel. The S-VIDEO input is dominant when in use. If separate video signals are connected to the S-VIDEO and VIDEO AV2 in(puts), the signal from the VIDEO AV2 in(puts) will not be usable.

Audio and S-Video cables are not supplied with the TV, but are available from Magnavox or electronics retailers.

AV2

CVI

AV1

24

Front

SVHS

1 2 3 POWER

4 5 6 CH

7 8 9 CH

A/CH 0 CC VOL

STATUSVOL

EXIT

MENU

SLEEPMUTE

SURF SMART

PICTURE SOUND

MAGNAVOX

Back of TV

Monitor 2	AV2 in	1
VIDEO
L/Mono	Y
AUDIO	Pb
		S-VIDEO

R

COMPONENT INPUT

Audio Cable

(Red and White)

S-Video Cable

4
L	R	VIDEO	S-VIDEO
AUDIO OUT		OUT	OUT	1
2			Back of VCR

3	VCR	5
	(Equipped with
	S-Video Jacks)

10