Magnavox 32MD350B user manual  Channel List, Use Cursor K/L to select Channel List, then press

Channel List

The channels selected here can be skipped when selecting the channels using [CH + / -].

Those channels can still be selected with [the Number buttons].

1 Press [MENU] to display the main menu.

2 [Cursor K/L] to select “SETUP”, then press [OK].

PICTURE	Autoprogram
SOUND	Channel List
SETUP	Add Channels
FEATURES	Antenna
LANGUAGE
DVD

3 Use [Cursor K/L] to select “Channel List”, then press

[OK]

PICTURE	Autoprogram
SOUND	Channel	List
SETUP	Add Channels
FEATURES	Antenna
LANGUAGE
DVD

4 Use [Cursor K/L] to select the channel you want to remove, then press [OK]

PICTURE				DTV	11 . 1
SOUND				DTV	11 . 2
SETUP	Highlight channels for Ch Up/Down key			DTV	11 . 3
FEATURES
	selection.
LANGUAGE
DVD
	Ch Select			B ACK	Back
		OK	Watch/Skip

•The channel display for the removed channel darkens. You will not be able to select the channel

again using [CH + / ]

•To reactivate a removed channel, use [Cursor K/L] and press [OK]. The registered channels are highlighted.

•When you remove a main channel, its subchannels are removed as well.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

5 Press [MENU] to exit.

This function lets you add the channels that were not added by the	INTRODUCTION
Add Channels
autoprogram due to the receptible condition at the initial setting.
	PREPARATION
1 Press [MENU] to display the main menu.

2 [Cursor K/L] to select “SETUP”, then press [OK]

							WATCHING
		SOUND		Channel List
		PICTURE		Autoprogram
				Add Channels			TV
		SETUP
		FEATURES		Antenna
		LANGUAGE
		DVD
							OPTIONAL
3 Use [Cursor K/L] to select “Add Channels”, then press
	[OK]						SETTING
		PICTURE		Autoprogram
		SOUND		Channel List
		SETUP		Add Channels			OPERATINGDVD
		FEATURES		Antenna
		LANGUAGE
		DVD
4 Use [the Number buttons] to enter the number of the
	channel you want to add, then press [OK]
							DVD
		PICTURE					SETTING
						Add channels
					11
		SOUND	For analog channels, select a channel to be
		SETUP	added using number keys.
		FEATURES	For digital channels, you must perform
		LANGUAGE	Autoprogram function.				TROUBLESHOOTING
		DVD
				Ch Change B AC K Back
5 Press [MENU] to exit.
							INFORMATION
	Note:
	• If setup completes successfully,
	“Added to the channel list” is displayed.
	• If external input is used, it is not possible to register the
	channel and “Unavailable” will be displayed on the TV
	screen.
	• By using [CH + / -], you can select the memorized
	channels only.

23

EN