Apple 9000 manual Using the On-Screen Menus, Volume

Volume

•To increase the volume, press

•To decrease the volume, press

Volume adjustments are saved for each source you have con- nected (including external speakers).

Using the On-Screen Menus

The projector has four on-screen menus that allow you to make image adjustments and change a variety of settings. Most of these adjustments aren’t available directly from the keypad or remote.

To open the on-screen menus, press the menu button on the key- pad or remote. This changes the volume, source, and mute but- tons on the keypad to menu navigation buttons (and illuminates the keypad green). Press the corresponding buttons to move the cursor up, down, left, or right. To select a menu, use these buttons to move the cursor to the tab for the menu you want, then click either mouse button. To change a menu setting, move the cursor to the setting you want to change using the navigation buttons, then use one of the two mouse buttons to make changes. Press menu again when you want to close the menus. All changes are saved when you close the menus.

To select a menu using the remote, use the disk mouse to move the cursor to the tab for the menu you want, then click either mouse button.

disk mouse

NOTE: Some options in the menus are only available when certain equipment is connected. For example, the Fade setting in the Audio menu is only active if external speakers are connected.

left mouse	right mouse
button	button
	FIGURE 20
	Disk mouse and mouse buttons on remote

25