Apple 9000 manual Projector has the following audio/video inputs, Source Video Audio

S e t t i n g u p t h e P r o j e c t o r

NOTE: For model 9000-INT: To use video input, an optional video board must be installed in the projector. Contact Boxlight for more information.

NOTE: For the connection pin assignments, see page 55.

Computer 3	external
	speaker	Video 1	Video 2	Computer 2
				Computer 1

CablePro		s-	video
				composite		HD 15
					5 BNCs
	wired remote			video-RCA		VESA

FIGURE 8

Connector panel

The projector has the following audio/video inputs:

Source	Video	Audio
Computer 1 3 Single-ended analog RGB		Left and right line-level
	+ 2 H&V sync (5 BNCs)	(2 RCAs)*
Computer 2 VESA Single-ended analog		Left and right line-level
	RGB (HD-15)*	(2 RCAs)*
Computer 3 CablePro Analog RGB*
Video 1	S-video Y/C (4-pin circular)	Left and right line-level
	OR	(2 RCAs)*
	Base-band composite video
	(BNC)
Video 2	Base-band composite video	Left and right line-level
	(RCA)* OR	(2 RCAs)*

Base-band composite video (BNC)

*indicates cable included with projector

10