19
USING THE PROJECTOR
This section describes how to use and make adjustments to the
projector. It also provides a reference to the remote and keypad
buttons and the options available from the on-screen menus.
Basic Image Adjustment
1Make sure you have powered up your equipment in the right
order (page16).
2If the image doesn’t display completely, adjust the height and
tilt of the projector (page20), zoom the image (page 20), or
center the image by adjusting its horizontal or vertical posi-
tion (page32).
3If the image is out of focus, rotate the lens to focus it (page 20).
4If the image appears to shimmer or if it has blurry vertical
bars after you have adjusted the focus, turn Auto Image
(page3 1) off and then back on to reset the automatic sync and
tracking. If that doesn’t clear up the image, adjust the sync
(page32) and/or the tracking (page 32) manually.
5If the colors don’t look right, adjust the brightness, contrast,
and tint (page27), and color and color temperature (page 28.)