U s i n g | t h e | P r o j e c t o r |
|
|
|
NOTE: The Manual Sync, Manual Tracking, Horiz.
Position and Vert. Position
buttons are available only for
computer sources. The projector
sets these options automatically
for a video source.
Manual Sync
The projector adjusts signal synchronization automatically for most computers. But if the projected computer image looks fuzzy or streaked, try turning Auto Image off then back on again. If the image still looks bad, try adjusting the signal synchronization manually as described below.
1Click the Auto Image button to turn Auto Image off.
2Press the left or right mouse buttons repeatedly until the image is sharp and free of streaks.
Manual Tracking
The tracking function adjusts the projector to match the video signal from your computer. The projector usually adjusts the tracking automatically when you connect your computer. How- ever, if the display shows evenly spaced, fuzzy, vertical lines or if the projected image is too wide or too narrow for the screen, try turning Auto Image off then back on again. If the image is still bad, try adjusting the tracking manually as described below.
1Click the Auto Image button to turn Auto Image off.
2Press the left or right mouse buttons repeatedly until the fuzzy vertical bars are gone.
Horiz. Position
Follow these steps to manually adjust the horizontal position.
1Click the Auto Image button to turn Auto Image off.
2Press the left mouse button to move the image right; press the right mouse button to move the image left.
Positioning adjustments are saved when you power off the pro- jector.
Vert. Position
Follow these steps to manually adjust the vertical position.
1Click the Auto Image button to turn Auto Image off.
2Press the left mouse button to move the image down; press the right mouse button to move the image up.
Positioning adjustments are saved when you power off the pro- jector.
32
