Magnavox 32MT3305/17 Using The S-Video Input Jacks, 3Turn the VCR and the TV ON, Helpful Hint

5

USING THE S-VIDEO INPUT JACKS

The S(uper)-Video connection on the rear of the TV can provide you with bet-

ter picture detail and clarity for the play- back of accessory sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and S-VHS VCR (video cassette recorder) tapes than the normal antenna picture connections.

NOTE: The accessory device must have an S-VIDEO OUT(put) jack in order for you to complete the connection on this page.

1Connect one end of the S- VIDEO CABLE to the S-VIDEO jack on the back of the TV.Then connect one end the AUDIO (red and white) CABLES to the AV2 in AUDIO L and R (left and right) jacks on the rear of the TV.

2Connect other end of the S-VIDEO CABLE to the S-VIDEO OUT jack on the back of the VCR.Then connect the other ends of the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR.

3Turn the VCR and the TV ON.

4Press the CH + or CH- buttons

to set the TV to its SVHS2 channel. (Go to your lowest chan- nel, for example channel 1, then change channels down to find the correct source channel.)

5Now your ready to place a prere- corded video tape in the VCR and press the PLAY
button.

Back of TV

Monitor 1	AV2 in	1
VIDEO
L/Mono	Y
AUDIO	Pb
		S-VIDEO

R

COMPONENT INPUT

Audio Cable

(Red and White)

					S-Video Cable
L	R	VIDEO	S-VIDEO
AUDIO OUT		OUT		OUT
2			Back of VCR 2
3	VCR (Equipped with					5
	S-Video Jacks)
	1	2	3	POWER		4
	4	5	6	CH
	7	8	9	CH
	A/CH	0	CC	VOL

STATUSVOL

EXIT

MENU

SLEEPMUTE

SURF SMART

HELPFUL HINT

The S-VIDEO and VIDEO AV2 in(puts) are in parallel. The S-VIDEO input is dominant when in use. If separate video signals are connected to the S-VIDEO and VIDEO AV2 in(puts), the signal from the VIDEO AV2 in(puts) will not be usable.

PICTURE SOUND

MAGNAVOX