Magnavox 40MF430B Preparation, Connection to Cable Receiver or, Satellite Box, Antenna Connection

Models: 40MF430B

1 37
Download 37 pages 54.08 Kb
Page 9
Image 9
PREPARATION

PREPARATION

No supplied cables are used with these connections:

Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

Before you connect:

Be sure your antenna or other device is connected properly before plugging in the AC power cord.

English

 

Connection to Cable Receiver or

INTRODUCTION

Satellite Box

 

Use an HDMI or component video cables to connect the

 

HDMI or the Component Video Input jacks of the unit to

 

the HDMI or the component video output jacks of the cable

 

receiver / satellite box.

 

If you connect to the unit’s Component Video Input jacks,

PREPARATION

satellite dish

connect audio cables to the Audio L/R Input jacks right beside

 

the Component Video connector.

 

e.g.)

 

Antenna Connection

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

e.g.)

VHF / UHF No supplied cables are used with these connections: analog

or DTV antenna

RF coaxial cable

or

cable TV signal

rear of this unit

Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit to memorize all available channels in your area. [Initial Setup] p.15

Note

If you have any question about the DTV’s antenna, visit www.antennaweb.org for further information.

Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items.

For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit.

If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than a set top or inside antenna.

To switch your reception source easily between antenna and cable, install an antenna selector.

If you are not receiving a signal from your cable service, contact the Cable provider.

or

RF coaxial cableWATCHINGTV
ANT IN
cable TV signal

cable receiver /

 

 

 

 

 

including PPV

 

 

STEREO

 

 

satellite box

 

 

PCM

 

OPTIONAL

HDMI OUT

or

AUDIO OUT

COMPONENT VIDEO OUT

 

L

R

Y

Pb/Cb

Pr/Cr

 

 

 

SETTING

 

 

 

 

(green)(blue)

(red)

 

 

 

 

 

 

HDMI cable

 

 

 

 

 

TROUBLESHOOTING

 

or

component video cables

 

(red / blue / green) and audio

 

 

 

 

 

 

cables

 

 

 

 

 

 

 

or

INFORMATION

side or rear of

 

 

 

 

 

 

this unit

 

 

 

 

 

 

 

You can also connect this unit to the cable receiver or satellite box other than the HDMI or the component video output jacks because they might have different output jacks.

Required cables and connecting methods of the cable receiver / satellite box, or the availability channel for the clear QAM may differ depending on the cable / satellite provider. For more information, please contact your cable / satellite provider.

9

EN

Page 9
Image 9
Magnavox 40MF430B Preparation, Connection to Cable Receiver or, Satellite Box, Antenna Connection, Before you connect