Magnavox 40MF430B Watching Tv, Channel Selection, 11.1, Video1, Video2, HDMI3, HDMI2, HDMI1

WATCHING TV

Sleep Timer can be set to automatically turn off the unit after an incremental period of time.

	SLEEP	repeatedly to change the amount of time (
Press			increases
				Sleep	120min.
the time by 30 minutes up to 120 minutes) until shut off.

Press SLEEP once to call up the display for checking the remaining time.

To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] is displayed.

Switching Each Input Mode can easily switch with the remote control between TV (ATSC or NTSC) and external devices when they are connected to the unit.

Press SOURCE or CH + repeatedly to cycle through the input modes.

Source

TV

Video1

Video2

Component

HDMI1

HDMI2

HDMI3

e.g.)

11.1 Video1 Video2 Component

DTV/TV channel

HDMI3 HDMI2 HDMI1

(or PC input)

Pressing CH − reverses the direction of the input modes.

Freeze Mode can freeze the image shown on the TV screen for 5 minutes.

Press FREEZE to freeze the image.

Freeze

The sound output will not be paused.

To cancel freeze mode, press any buttons except

Channel Selection

Select channels by using CH + / − or the Number buttons

•To select the memorized channels, use CH + / − or the Number buttons

•To select the non-memorized channels,

use		11.1
	the Number buttons

To use the Number buttons

ATSC

When selecting digital channel 11.1

Be sure to press before entering the subchannel number.

NTSC

When selecting cable or analog channel 11

Press PREV CH to return to the previously viewed channel.

Note	[No Signal]					will appear on the TV screen after the subchannel broadcast is over.
	[A
				udio			]
					only program			message will appear on the TV screen, when you receive
	only sound signal.

16

EN