CCZ196comb.QX33 4/6/99 7:05 PM Page 41
Timer Recording With the VCR Plus+ Programming System 41
Follow the steps below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure:
●The clock has been set. If not, CLOCK MUST BE SET appears.
●Channels are programmed.
●There is a tape in the TV/VCR (make sure the tape’s record tab is intact and the tape is long enough to record the program).
●You have completed the steps on pages 39-40.
Complete each step within 60 seconds of completing the previous step. If you don’t, you may return to step 1.
POWER |
| EJECT |
SLEEP | SPEED | MEMORY |
REC/OTR |
| PAUSE/STILL |
| PLAY |
| 3 |
REW | STOP | F.FWD | |
MENU | STATUS/EXIT | CLEAR |
|
1
Press the COMBI button, then press the VCR PLUS+/ENTER button.
VCR PLUS+ PROGRAM
PLUS CODE : – – – – – – – –
TO END PRESS EXIT
2
Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record (this number is different for every program, and it can be three to eight digits long). Finally, press the VCR PLUS+/ENTER button.
VCR PLUS+ PROGRAM
PLUS CODE : 95557 – – –
TO SET PRESS VCR +
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.
●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.
●DAILY: The VCR will record every day from Monday to Friday
– starting at the same time and recording for the same length of time.
●WEEKLY: The VCR will record on the same day, at the same time, and for the same length of time every week.
VCR PLUS+ PROGRAM
>ONCE
DAILY (MON - FRI)
WEEKLY
SELECT ▲▼ CHOOSE B
TO END PRESS EXIT
| 1 | 2 | 3 |
|
|
| 4 | 5 | 6 | CH. | 2 |
|
| ||||
| 7 | 8 | 9 |
| |
1 | A.CH | 0 | +100 | VOL. | |
CABLE/DBS | COMBI |
|
| ||
|
| VCR PLUS+ |
|
| |
VAR.SLOW | /ENTER | MUTE |
| ||
TRACKING | F.ADV | SLOW |
| ||
| SMART | SMART | SKIP INDEX |
|
|
| PICTURE | SOUND | SEARCH SEARCH |
|
|
Helpful Hints
•If the timer recording will occur on a Saturday or Sunday, you cannot select DAILY at step 3. ERROR may flash on the screen after you com- plete step 3. Select ONCE or WEEK- LY instead.
•You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 43.
•You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 43.
•If CODE ERROR flashes after you enter the PlusCode programming number and press the VCR PLUS+/ENTER button, the number you entered was incorrect (for exam- ple, too short). If this happens, enter the correct number.
•CLASH may flash on the screen after you complete step 2. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not be carried out.
