CCZ252comb.QX33 4/6/99 8:50 PM Page 32
32 Timer Recording
Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure:
●The clock is set. If not, CLOCK MUST BE SET appears.
●Channels are set up.
●There is a tape in the TV/VCR. (Make sure the tape’s record tab is intact and the tape is long enough to record the pro- gram.)
Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1.
1
Press the MENU button.
> PRIM. SETUP |
| PRESS B | |
| VCR PROGRAM |
|
|
| VCR SETUP |
|
|
| CAPTION |
|
|
| REMINDER |
|
|
| BRIGHTNESS |
|
|
2
Press the PLAY/▲ button or the STOP/▼ button to select VCR PROGRAM, then press the F.FWD/B button.
3
2
1
POWER |
|
| SLEEP |
| 2 | 3 | ALT.CH |
1 |
| ||
4 | 5 | 6 | o |
|
|
| CHANNEL |
7 | 8 | 9 | p |
| 0 | +100 | o |
SPEED |
| MUTE | VOLUME |
|
| ||
|
|
| p |
| o |
| |
| PLAY |
| |
REW |
| F.FWD | |
| STOP |
| |
| p |
| |
REC/OTR | MEMORY | PAUSE/STILL | |
|
|
| o |
MENU | STATUS/EXIT | CLEAR | TRACKING |
| |||
p
| PRIM. SETUP |
|
|
> VCR PROGRAM |
| PRESS B | |
| VCR SETUP |
|
|
| CAPTION |
|
|
| REMINDER |
|
|
| BRIGHTNESS |
|
|
3
Select a once, daily or weekly recording.
●Press the Number 1 button to select ONCE. The TV/VCR will record a TV program on any day you choose, up to 12 months away.
●Press the Number 2 button to select DAILY. The TV/VCR will record from Monday through Friday – starting at the same time and recording the same channel for the same length of time every day.
●Press the Number 3 button to select WEEKLY. The TV/VCR will record the same channel on the same day, at the same time, and for the same length of time every week.
VCR PROGRAM
1ONCE
2DAILY (MON - FRI)
3WEEKLY
4PROGRAM REVIEW
TO SELECT PRESS NUMBER
TO END PRESS EXIT
Helpful Hints
•If the power fails, programmed timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using the AUTO CLOCK feature. Details are on pages 14 - 17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12 - 13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power fail- ure.
•You cannot set a timer recording if RECORD DEFEAT is set to ON. Details are on page 36.
