Magnavox CCZ252AT owner manual On-Screen Status Displays, On Mode, Counter only Mode, OFF Mode

CCZ252comb.QX33 4/6/99 8:50 PM Page 26

26 On-Screen Status Displays

A status display, which includes the current time, channel, and other information (see illustration of the status display at right), will appear when you press the STATUS/EXIT button or certain function buttons. You can bring up the status display at any time by pressing the STATUS/EXIT button. Remove the status display by pressing this button again. The contents of the status display may vary.

ON MODE:

●Whenever a function button (REW(ind)/s, PLAY/▲, etc.) is pressed, the status display will appear for five seconds.

COUNTER ONLY MODE:

●When a function button (REW(ind)/s, PLAY/▲, etc.) is pressed, the status display will appear for five seconds. After five

seconds, only the counter will remain on-screen. To remove it, choose ON or OFF in the ON-SCREEN MODE menu. (There is an exception. When you press the STOP/▼ button, the sta- tus display will appear for five seconds, then disappear.)

OFF MODE:

●The status display will not appear when you press a function button. The channel number will appear briefly when you select a channel if channels are programmed.

To choose an ON-SCREEN MODE, follow the steps below.

Channel			Function
			Button
Time			Pressed
	12:00 AM		STOP
	CH10
	SLP	M 1:23:45
Tape		Counter
Speed		and
		Counter
		Memory

1

Press the MENU button.

2

Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP. Then, press the F.FWD/B button.

3

Press the Number 3 button to select ON-SCREEN MODE.

4

Press the Number 1 button to select ON, the Number 2 button to select COUNTER ONLY, or the Number 3 but- ton to select OFF. Your selection will appear on-screen.

5

Press the STATUS/EXIT button.

Helpful Hints

•If the channel you select has no broadcast, the screen will be solid blue.

•You cannot view closed captions during recording or tape playback if COUNTER ONLY is selected at step 4. Details are on pages 38 - 39.