Panasonic HDC-SD20P Quick start, Auto focus, Close the LCD monitor while the mode is set to

Auto focus

The lens is moved forward or backward automatically to bring the subject into focus. Auto focus has the following characteristics.

jAdjusts so that the vertical lines of a subject are seen more clearly.

jAttempts to bring an object with higher

contrast into focus.

Auto focus does not work correctly in the following situations. Record pictures in the manual focus mode.

jRecording distant and close-up objects at the same time

jRecording a subject behind a dirty or dusty window

jRecording a subject that is surrounded by objects with glossy surfaces or by highly reflective objects

jRecording a subject in dark surroundings jRecording a fast-moving subject jRecording a subject with little contrast

Quick start

This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is reopened.

≥When in Quick Start Standby mode about

60% ( / : about 70%) of the power used in Recording Pause mode is being consumed, so the recording time will be reduced.

¬Change the mode to .

1 Select the menu. (l 34)

[SETUP] # [QUICK START] # [ON]

2 Close the LCD monitor while the mode is set to .

HDC-SD20

HDC-TM20

HDC-HS20

The status indicator A flashes green and the unit goes into quick start standby mode.

≥ The lens cover does not close.

48

VQT1Y00