Problem
VIERA Link does not work.
When connected by the USB cable, this unit is not detected by the PC.
When the USB cable is disconnected, an error message will appear on the PC.
The power of the DVD burner cannot be turned on.
Cannot see the PDF operating instructions for HD Writer AE 1.0.
Cannot copy scenes on the SD card by connecting to other equipment with the USB cable.
Check points
[Setting on this unit]
≥Connect with a HDMI mini cable (optional). (l 103)
≥Press the MENU button, then touch [SETUP] # [VIERA Link] # [ON]. (l 103)
≥Turn the power to the unit off and then back on again.
[Setting on other devices]
≥Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch input. (For details on how to switch input, please read the operating instructions for the TV.)
≥Check the VIERA Link setting on the connected device.
≥Set the setting to control the VIERA Link of the TV to [Off] once, and the back to [On] again. (Refer to the operating instructions of the TV for details.)
≥Select another USB terminal on the PC.
≥Check the operating environment. (l 120)
≥Connect the supplied USB cable again after restarting the PC and turning on this unit again.
≥To disconnect the USB cable safely,
( ) icon in the task tray and follow the instructions on the screen.
≥When the unit is connected to the DVD burner, use the respective AC adaptors for both this unit and the DVD burner.
≥You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the PDF operating instructions for HD Writer AE 1.0.
≥Other equipment might have not recognized the SD card. Unplug the USB cable once, and reconnect it.
141
VQT1Y00
