About condensation
When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below.
Causes of condensation
Condensation takes place when the ambient temperature or humidity is changed as follows.
≥When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
≥When this unit is moved from an
≥When a cold room has been warmed up quickly.
≥When cool wind from an air conditioner is directly blown onto this unit.
≥After summer afternoon showers of rain.
≥When this unit is in a very humid place where the air is thick with steam. (e.g. a heated swimming pool)
Helpful hint
If, for example, you have used this unit for recording on a ski slope and are taking it into a heated room, place the unit inside a plastic bag, remove as much of the air from inside the bag as possible, then seal the bag. Leave the unit for about an hour in the room so the temperature of the unit is close to the ambient temperature of the room, then use it.
147
VQT1Y00
