Panasonic HDC-HS20P Connecting to a PC, Connect this unit to the AC adaptor, Turn on the unit

Models: HDC-HS20PC HDC-SD20PC HDC-HS20P HDC-SD20P HDC-TM20PC HDC-TM20P

1 164
Download 164 pages 22 Kb
Page 125
Image 125

With a PC

Setup

2 Connecting to a PC

 

Connect this unit to the PC after the software applications are installed.

Remove the supplied CD-ROM from your PC.

AUSB cable (supplied)

1 Connect this unit to the AC adaptor.

It is possible to use the unit connected to the PC with the batteries only, but you will not be able to write data into the unit.

2 Turn on the unit.

This function is available in all modes.

3 Connect this unit to a PC.

The USB function selection screen will appear.

Insert the USB connectors as far as they will go.

Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

4 Touch [PC].

When the unit is connected to a PC, its power cannot be turned off.

Disconnect the USB cable, before turning this unit off.

Do not disconnect the USB cable or the AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen.

Do not disconnect the USB cable or the AC adaptor while the access lamp is on or built-in memory access icon ( ) appears on the unit screen.

Do not disconnect the USB cable or the AC adaptor while the HDD access lamp is on or HDD access icon ( ) appears on the unit screen.

This unit is automatically recognized as an external drive of the PC. (l 127)

125

VQT1Y00

Page 125
Image 125
Panasonic HDC-HS20P Connecting to a PC, Connect this unit to the AC adaptor, Turn on the unit, Connect this unit to a PC