Panasonic HDC-TM20P Setting date and time, Select the menu. l, Touch Enter, ¬ Change the mode to

Preparation

Setup 6 Setting date and time

When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time.

¬Change the mode to .

1 Select the menu. (l 34)

[SETUP] # [CLOCK SET] # [YES]

2 Touch the date or time to be set, then set the desired value using / .

≥The year will change as follows: 2000, 2001, ..., 2039, 2000, ...

≥The 12-hour system is used to display the time.

≥ appears on the right top of the screen when [SET WORLD TIME] (l 40) is set to

[HOME], while appears when it is set to [DESTINATION].

3 Touch [ENTER].

≥The clock function starts at [00] seconds.

≥A message prompting for World time setting may be displayed. Perform the World time setting by touching the screen. (l 40)

≥Touch [EXIT] or press the MENU button to exit the menu screen.

Changing the date and time display mode Select the menu. (l 34)

[SETUP] # [DATE/TIME] # desired display style

≥You can also show or change the date and time display by repeatedly pressing the DATE/ TIME button on the remote control.

[DATE][D/T]

	12:34PM
NOV 15 2009	NOV 15 2009

[OFF]

Changing the date format

Select the menu. (l 34)

[SETUP] # [DATE FORMAT] # desired display style

Display style	Screen display
[Y/M/D]	2009. 11. 15
[M/D/Y]	NOV 15 2009
[D/M/Y]	15. 11. 2009

≥The date and time function is driven by a built- in lithium battery.

≥If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and time for approx. 6 months. (The battery is still being recharged even if the power is off.)

39

VQT1Y00