3 Open the LCD monitor.
HDC-SD20
HDC-HS20
The status indicator A lights red and the unit is put into recording pause
≥Quick Start Standby Mode is canceled if jabout 5 minutes have elapsed
jmode is set to 
junit is turned off
≥Time for Quick Start will be more than 0.6 seconds slower when the digital cinema is used.
≥It may take some time for Automatic White Balance to adjust.
≥In the Quick start mode, the zoom magnification becomes 1k.
≥If [ECONOMY] (l 36) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again.
≥Quick Start Standby Mode cannot be released by the remote control. Turn the mode to OFF when powering off.
Quick power on
(Only when recording to an SD card or built- in memory)
The unit is put into recording pause approx.
1.9seconds when the mode is set to 
from OFF.
≥ Start time will not shorten if there is no SD card inserted.
Start time will be shorten if the
¬Change the mode to 
.
1
Select SD card as a media to record from the menu. (l 34)
[MEDIA SELECT] # [SD CARD]
2 Select the menu. (l 34)
[SETUP] # [QUICK POWER ON] # [ON]
≥This function’s default setting is [ON].
≥In the Quick power on mode, the zoom magnification becomes 1k.
49
VQT1Y00
